The rom is based on the latest 06/06/2014 roadnav fw for I001 (nissan) but it include a file megane3.apk for the I145 model in the folder "winca\system\app" (just delete it if you don't need it).
In this firmware version and in the previous 05/20/2014 roadnav have finally fixed the "System Upgrade" function in the settings menu that was broken since they released the first official 4.03 fw; with this function it is possible now to avoid using the fused sd recovery and use a normal SD card (inserted in the dvd slot),to update the firmware.
Even more it's possible now, throught the aroma installer, to keep the user app and data when upgrading android! So no more hassle of redownloading and reinstalling you preferred apps, you'll keep all your settings as they were before the update.
NOTE: just the units with "System Upgrade" function correctly working can use the "Don't erase user data" option.
I added a couple of more options to the installer:
- a "WIPE Menu" to let you choose to format or not the data partition
- an option to preinstall or not the user apps from the folder "winca\app" in the sd.
1. MAIN MENU
- Flash original full firmware (including BT, MCU etc..)
- Flash KoTiX custom ROM
- Quit
- Install ROOT files
- Install 160 DPI mod (using xposed and app setting)
- Preinstall user apps from Winca\app sd folder
- Install KoTiX Radio player mod
- Install Bluetooth app mod
- Install Viper4Android
- Format data partition (If unchecked it will erase dalvik-cache only)
- Format internal Hard Disk
- Flash Bluetooth module
- Write Flash.bin (vers. S00C)
- Write MCU.bin (vers. N004)
They are very similar because both are based on the same 06/06/2014 firmware, but 2.6 have some important fixes and some apps taken from even newer firmware August 01.
This is what you'll get:
- Keep apps and data function is working properly now so you can update the firmware without loosing your settings and datas
- Waze work fine
- Youtube work fine
- The bluetooth dialer now can download all contacts from phone without problems
- Switching from radio to third party players like jetaudio turn off the radio (to go back you need to pause the player)
- I added some new logos i found in new builds.
- I added an option to format internal sdcard in the aroma installer
- maybe other things...
Here is the link to download the new 2.6 rom that include some extra apps too:
Link removed to avoid people with new fw bricks their units.
Enjoy and if you like my work, please consider donating ;-)
Hi KoTiX
ReplyDeleteI have a renault fluence ze an electric car :) that is based on the normal renault fluence how do i find out what hardware i have ?
From system info screen?
DeleteHi Kotix
Deletethx for your replay. I'm pretty sure it runs windows ce in some version but with some kind of shell on it
I cant get to windows home screen and the into screen only shows IMSI IMEI and VIN number no real hardware info would it be and idea to tru and boot from SD card ore usb port and what to put on linux ore android ore windows ?
thanks jens
Hi kotix, I have the I052 unit in my rover 75 running android 2.3.4, can I just copy your latest 4.0.3 version 2.4 straight to the root of a normally formatted sd card and then run the system upgrade or do I have to use the fused sd card. Also will I have to edit the config file to suit the screen type by changing it from I001 to I052.
ReplyDeletethanks Mark
You need a fused card to switch from 2.34 to 4.03 fw and of coarse replcae the i001 config files with the ones for your model.
DeleteHi KoTiX, why there are 2 car images (one image usual size and another a bit smaller) when open/close doors?
ReplyDeleteNever seen this before.
BTW - I removed Megane3.apk from app folder before flashing.
Device S150 - I305
Thanks,
Oleg.
No idea sorry, my unit don't have canbus so i really can't tell why...
DeleteCan you post a picture showing the 2 cars?
DeleteNo, have already rolled back to the previous one..
DeleteBut I tried 2.4 with same MCU but different options in the AROMA installer.
Looks like it depends on 'Install 160 DPI mod' choice. If not selected - it works as usual. If selected - there are two car images: the usual and the smaller one (modded?).
BTW - option to keep user data did not work for me. Every user application restored after flashing keeps failing on startup with Android error.
ok please send me a picture of the car image so i know what to look for.
DeleteTnx;)
Have found the image sources for it (look into can folder) - https://www.dropbox.com/s/o1ahu11nlaljwrw/config.7z
DeleteHey ole_zaz, can you contact me by email please?
DeleteI see you have a can.apk in that folder, where is it coming from?
Hi KoTiX, Just wanted to say thank you for your hard work. I have successfully flashed this onto a S100 C035 unit with DVB-T. The freedom of choice outweighs the extra boot time. I have installed many multimedia apps,Movies,TVShows,Radio,Music with no issues. Sygic for navigation and a Xbox 360 controller with many emulators for the passengers entertainment. Thanks again and keep up the good work. Very much appreciated.
ReplyDeleteYou wellcome! I'm glad you have everything working fine and you are happy with your new android unit.
DeleteIf you don't mind... please consider donating ;)
Even a small tribute will be really appreciated. Cheers :)
KoTix, the link to download is broken,
ReplyDeleteThe link is fine.
DeleteHi KoTix
ReplyDeleteMy question is because i don´t have my original firmware. Could I install
this Update without my original firmware?
The big problem is the white-screen start and when it starts up normally
some of features are not working property.(like radio is searching always
an other frequency,BT)
I´m looking for just a Update to my Radio but i can`t find it, so this is
the reason why i want to install an Android system.
I have a C158 Model with the following system version:
Os version:S100-uni20130829
App version: S100-App- v1.18.7.0
MCU Version: M00J S00B C158
DVD Version: 3227 V100 7706
BT: 20121204
Thank you for your help in advance,
This is the i158 fw from which take the config folder.
Deletehttps://yadi.sk/d/a4p9lY9uHhaFZ
but if anything goes wrong you cannot go back to wince as you don't have original wince fw.
Thank you very much! That´s great!
DeleteDo you have a wince firmware also? ;-) just in case i would screw up...
Thanks a lot!!
i have this:
Deletehttps://dl.dropboxusercontent.com/u/87479392/C001%20Firmwares/C001%20%20V%20%201.10.7.1.rar
you can easily convert it to your model running the SetUpdateXML_EN.exe that is included in the rar.
Thanks!
DeleteI have two questions:
1,in the i158 update which you sent, there is a chines txt where can i see the MCU and Flash numbers but this numbers are not the same what i have. Should i change it?
2, What should I delete from your Android ROM, or should i copy it the hole i158 fw in config folder or just the config file from rar?
Thanks a lot!
Hi Kotix. I've installed your latest update and have also had the version before, the problem is that my GPS altitude keeps jumping to 0. It's not the GPS software as the stock GPS monitor also shows it jumping continously. Anyone else having this problem and how can I fix this. Thanks for the great work.
ReplyDeleteI have no idea, sorry.
Deletei have this problem also, en that's why my navi software e.g. igo, navigon and sygic keeps delaying my position on the map when driving. ;-(
DeleteHola Kotix, tengo un S100 Platform Name：TID-C093 Mercedes C class W203, le instale el firmware 4:03 y me encanto pero los controles del volante dejaron de funcionar y le instale el iGO Primo APK pero no encuentra satelites. crees que halla alguna solucion para estos dos problemitas. Gracias por el aporte.
ReplyDeleteSi los mandos al volante son controlados desde el canbus probabilmente no trabajan, para Igo sabe solo que tiene que ser configurados en com2 9600 baud.
DeleteHi KoTix,
ReplyDeleteWe flashed the system succesfully. Still have some questions.
Is it right that the canbus still not works for a Ford Focus 2011?
We used the SetupXML update but when pressing OK we got the message Set the update.ini file failed. Do you know why?
My MCU is C003. I assume that I have to choose I003-2 and LCD 5 (8"). Am I right?
Thanks for your answers.
Regards
Found how SetupXML update works :-)
DeleteUnfortunate I had to install the original firmware (WinCE). Too many "not working" issues on the Ford Focus. I have to be patient until there is a good working android version.
Deletekotix o tu sabes en donde puedo encontrar el firmware 1.18.7 para poder instalar el skin pack
ReplyDeleteSi tiene un fw mas nuevo, puede probar esto:
Deletehttps://www.dropbox.com/s/tcpd6bft4saiwk9/S100%20SkinPack%201.0.9.0%20and%20Higher.rar
Es el skinpack modificado para que funciona en los nuevo fw.
No lo he hecho yo, pero parece funcionar bien.
Muchas gracias lo probare....
DeleteFunciono perfectamente muchas gracias....
DeleteThis comment has been removed by the author.
ReplyDeleteStrange that there are Ford Focus systems with Android but unable to find a working firmware :-(
ReplyDeleteHi Kotix,
ReplyDeleteI know that you are not familiar with the navigation. The navi takes the gps setting of the system. Systems shows a good connection with satallites but the navi keeps saying "waiting for a good gps signal". Is there a file or something I can see or change? E.g. baudrate and com port?
The canbus seems to work with setting bustype=2. Parking sensor car is again on the screen. Steerwheel functions not yet. Now the GPS....
DeleteFor igo you have to set com2 baud 9600.
DeleteDoes GPS work on gps monitor app?
Yes the monitor app works. Continue tomorrow :-) Tnx!
DeleteGPS still not working but steerwheel function is working now! Bustype="22" and derivativeID="0"
ReplyDeleteHardware seems to be ok. There are enough satellites. The navi does not understand the settings.
DeletePort 2 and baud 9600.
Sorry can't help more, you should ask on xda forum
DeleteSygic works fine with the hardware gps! I was trying iGo Primo and TomTom but as I understand TomTom only works on smartphones :-(
ReplyDeleteAlmost everything is working now. Almost....last thing to solve: only the SRC button is illuminated. BAND, NAVI and DVD are not illuminated. Is it a known problem?
No, no problems with buttons lights. Just set the colour number.
DeleteI had installed on your Android 4.0.3 version v2.3 and iGO primo we worked perfectly, but when I installed your Android 4.0.3 v2.4 version more impossible when I install iGO primo run it, appears to me an error. After I re-installed Android 4.0.3 v2.3 and higher even after the installation can not run iGO primo. I've tried various versions of iGO primo and one that we previously worked now no longer work. It appears to me an error such as "folder is missing or incomplete." What's the problem?
ReplyDeleteThere is no difference in the roms 2.3 and 2.4 regarding navi SW.
DeleteCheck your internal sdcard for errors.
Thanks KoTiX!
DeleteProblem is solved, I copied all the folder iGo in my unit and from there start you off on the installation and now everything is ok. iGo now works perfectly and does not need me any more cards in the GPS slot. I think something is wrong with that slot and I do not know how to solve it, maybe you know how to eat properly checked or not.
Btw. Your firmware Android 4.0.3. v2.4 works perfectly on my car Hyundai i20. Appointed him in I030 because the original windows firmware was C030. Thank you very much
Hello KoTIX this download is the same for the s100 or only for the s150? https://www.dropbox.com/s/ne8ufi93b30w49u/S150%204.03%20KoTiX_v2.4.rar Thanks.
ReplyDeleteSame.
DeleteEverthing works now! Simple question: I'v installed spotify and when I launch spotify it does not turn the radio off like other apps do. Any ideas how to shutdown the radio app?
ReplyDeleteHello KoTix, on first thank you for your work on this firmware for yours S100/150 units, you're the best.
ReplyDeleteI have a little problem with the V2.5, i search for having access on the 11 bands equalizer setup menu for DSP and i don't find anywhere. A mistake of mine or is it by-passed by the Viper installation? Best regards
Superboost
Viper don't replace the standard equalizer, my unit don't have DSP so i can't tell but it's better to stay on v2.4 ROM for now. The july 7 Fw isn't really good.
DeleteHello KoTIX please help me for the right set in the adset file here is the info of the HU:
ReplyDeleteOs edition:S100-uni20130829
App edition: S100- v1.9.7.0
MCU edition: V00I S00B C223
DVD edition: 3227 V101 7705
BT: 20121204
And have another two question( mabe you help to me) if i start HU and start android stock player sometimes no sound from the speaker if i change to the radio sounds hear helps only if i have a restart the HU and this replay sometimes ( im using a sdhc card with a lot of mp3 and some dir maybe this is the problem i dont know). And another problems with a DVB-T stock app(tv app) if i have a win ce i dont have a problem if im start using android i dont have a chance to search and using DVB-t tuner (i means dotnt have a compatibility). If i search in the Tv application channel on the display still see the same picture from the tuner means MHZ and channel. Thanks for the answer
I can't help you with the tv problem because i have not a DVB-T module on my unit.
DeleteIf you have no sound from mp3 or other android apps but you have sound from radio and dvdplayer then you have a hardware problem. Better maybe if yuo switch back to wince and check if everything still work.
Hi Kortix,
ReplyDeleteI recently bought a navi unit for my camry (2012) from china.Is it possible to use your software on it?The unit comes with android 4.03 software but has alot of bugs (freezes most of the times).
Here is a link of the unit ; http://www.hicesan.com/?p=538.
Thanks
No, that is not a S150 model. It's another brand.
DeleteHi Kotix,
ReplyDeleteI recently upgraded my C045 unit to I045.
At the first attempt I used your FW (edited to suit my unit) with aroma installer, but then I had no air condition controls display. After that I upgrade it with a modded original FW and everything works perfect.
Then I try to root the device using your FW, I checked only a root option, but after the process was done I had no air condition display again.
Is there any way to achieve a root only, without changing any other settings? Maybe some kind of standalone apk?
Best regards.
Hi Goran I guess you have used "dimadina" Cruze firmware, right?
DeleteIf you aren't use it, please give the link to the fw you are using. Tnx ;)
The only other way to gain root is to use Baidu software:
http://forum.xda-developers.com/showpost.php?p=53198622&postcount=2595
Yes, you're right, it's Dimadina's fw. It's working OK, still some cosmetics issues regarding 160 DPI mod are to be solved, otherwise everything is OK.
ReplyDeleteThanks for the xda link, I missed it... I'll try Baidu software in next few days, I'm very busy right now.
Hi there
ReplyDeleteI already install this version Kotix, But same error like on other version:
Im getting the following error on Installing some applications. For example MEO Drive, Ndrive ,TomTom... (GPS Software)
Im see this error when try to open it:
Error 5
Failed to lunch application due to invalid
https://www.dropbox.com/s/gvsmqeclzstsokl/IMG_1510.JPG
You know what happening here?
DeleteKotix... I just used for my Renault one version from Factory (WINCA or something) with android 4.0.3....
DeleteIt seems the rom dont update more the bloutooth or other function more than yours version...
Problem is..
Still cannot install Apps because Error 5
Hi KoTiX
ReplyDeleteCan i update my C204 to S150?
And do you have the wince firmware, just in case if i should fail the update or the street wheel control not works.
Best regards
This comment has been removed by the author.
ReplyDeleteHi KoTiX,
ReplyDeleteHow do you install Extra apps_v1.1.rar??
Where do we have to put it??
During the flash or can that be done after??
Many thanks
During flash you put them in "winca/app" folder. Else you install them manually with file browser.
DeleteHi there.
ReplyDeleteI wonder if I can put the android system on my unit c256?
A greeting and thank you very much
kotix hello'm from Brazil and my english very bad
ReplyDeletethe steering wheel buttons not working station would like to know if you have any solution
s100-uni20130829
s100-v1.10.7.7
y00is00b C245
3227 v100 7706
20121204
Voce esta com android nele? Configurou o SWC?
DeleteHi KoTix
ReplyDeletebelow is the link where i bought the s100 sat nav for my car
http://www.ebay.com.au/itm/271021761969?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I have installed s100 last month, sometime the unit will freeze(No button light, no screen, nothing at all), when this happen, i will have to use pin to reset the reset button.
i have send the unit back to seller and the seller resent me a brand new one, but the problem still exist...
do you have any idea about it?
it only happened when i start the car.
another thing, if i just turn the ignition on but not start the engine, the screen on the unit will come straight on, but if i turn the ignition all the way to start the engine, it took the unit about 10~15 second to come on, does this sounds normal to you?
No idea sorry, maybe a bad wiring?
DeleteHi kotix, I have the I182 unit in my Toyota running android 2.3.4, can I just copy your latest 4.0.3 version 2.4 straight to the root of a normally formatted sd card and then run the system upgrade or do I have to use the fused sd card. Also will I have to edit the config file to suit the screen type by changing it from I001 to I182 if is it so what is the config file of my s150.
ReplyDeletethanks Mark
You need to apply exactly the same procedure to convert from s100 to s150.
DeleteFor config files you are alone, sorry.
KoTix. tengo 1 pregunta, ya se puede configurar el CANBUS en el modelo S100 Platform Name：TID-C093 Mercedes C class W203, le instale el firmware 4:03 pero no funcionan los controles del volante. Gracias...
ReplyDeleteHi kotix, I have the w2- I018(via WITSON) unit in my Toyota running original android 4.03 fw..Can I only root system and update with moded apps w/o lose my settings and How to do it?! Copy wince folder to normaly SD (not in root) end via SYSTEM UPDATE?!
ReplyDeleteYou can root 4.03 using "baidu":
Deletehttps://www.dropbox.com/s/8n4dhqucw3xdav5/BaiduRoot_2001.apk
System update is not very reliable right now and keep data function is not working properly atm.
This comment has been removed by the author.
DeleteKotix, i already have root access, How i fix the resolution problem using Xposed'
ReplyDeleteKotix, its posible to run waze in your firmware version?, it´s posible to conect a BT divice (OBD2)?
ReplyDeleteregards,
Waze work OK on my 2.4 rom
DeleteThis comment has been removed by the author.
ReplyDeleteHi kotix,
ReplyDeleteFirst of all thank you very much for your great work.
I have a little problem with the las version of android.
I really need to play music using folders, because I have many mixes and it's confusing to play them using author or album options. So I decided to install an aplication called "EZ folder player free" wich works great. The problem is that this app only reproduced audio if the rom music aplication is running and play music, I mean, if I launch EZ, every app get muted, and I see how the music is playing, but there is no sound, and if I launch the rom music player and play a song, both music files sound at the same time, and if I pause the rom music player the EZ app get mute again, but still continue reproducing.
It's like there is a channel or something like that for the musci player, and if the original music player doesn't "open the door" anything can't sound.
Any solution? I'm gtting mad...
Thank you
Unfortunately that is a bug of all the 4.03 fw on this units.
DeleteWhat i do normally to gain again the audio priority on third party players is to start the default player and pause it, or start video player and pause it.
Hi Kotix, I am Zweistein, remember?
ReplyDeleteI have installed from scratch your latest build V.2.4 on my Mazda CX-7 I097 winca, keeping no user data, all the app pack and the early working config for my model.
Everything seems to work fine, apart some strange misbehaving on tv that I still have to investigate better.
The only real problem anyway is that I have no verse to login into GooglePlay app, having no way to install and update apps.
It aways responds "User and pass not match" on Existent account.
WiFi/Tethering works fine and traffic is generated during login process, Logging through browser obviously works fine.
My idea is that could be some incompatibility between Google services of the build or better, some charset issue which scramble password during login request to the server.
Any other idea or solution?
Many thanks in advance.
Z.
Would you try this new version?: https://www.dropbox.com/s/mgqvivnmarl13ad/S150%204.03%20KoTiX_v2.6.rar?dl=0
DeleteYou can use the "don't wipe user data" function to keep your apps and stuff.
It will update just the system folder including google play store and services.
You don't need to flash mcu if you have no problems with it.
Ciao ;)
As usual many thanks Kotix :)
DeleteI will try it out later today and I will tell you the results.
Other question: my memory fails and I can't remember the BT code to enter the factory setup. Can you please remind it to me?
Ciao :)
Hi kotix, after a long time yesterday I had time to finally try the new 2.6 build as you suggested, but unfortunately I still have troubles with both my issues:
Delete1) no way to register a not gmail account (but google account yet) on Google Play or youtuube apps: bad user or pass error; I coorectly succed in browser but not in Google Play
2) It seems to ignore the Digit TV module setting (TVmode="1") in FactoryModeValue.xml. After the setup, if I activate the TV Module there's no way to interact with it or recalling the menu tapping on screen
I hope you can help me to understand
See you
F.
Hello KoTiX, My name is Marcelo, My model is S150 Android I802, installed the S100 / S150 4.03 KoTiX android v2.4 rom. Stopped working the back button and menu. The key also does not work to change the color of the LEDs. I have the original firmware 4:03 (https://mega.co.nz/#!X9Z3kB6S!jvTMzYlUJQTOuEAcLxZNq2MLfeiRtDkM2pHfHVRtgMw) but this does not support my language (Portuguese Brazil). Can you help me?
ReplyDeleteDid you replace the config folder in my rom with the one included in your original fw?
Deletedo not. I just installed your rom
DeleteThat's why isn't working right.
DeleteNow flash it again with the right config folder.
You can even use my more recent rom too:
https://www.dropbox.com/s/mgqvivnmarl13ad/S150%204.03%20KoTiX_v2.6.rar?dl=0
KoTiX, you fm v2.6 no portuguese support? v2.4 yes portuguese support, and v.2.4 and 2.6 no work MENU and BACK button. No word LED colors choose color
DeleteI'm replace the config folder in (update_S150A.zip) ou in (winca/config) ?? you use the SKYPE?
DeleteWinca\config
DeleteTo enable your language, edit the files Locales.xml and add this:
Locale>pt_BRpt_PT</Locale
at the bottom
NO WORKING, im need working LANGUAGE IMPUT > PORTUGUESE BRAZIL im mi FW
Delete(https://mega.co.nz/#!X9Z3kB6S!jvTMzYlUJQTOuEAcLxZNq2MLfeiRtDkM2pHfHVRtgMw)
Sorry i misstyped the string, replace the Locales.xml in your config with this one:
Deletehttps://www.dropbox.com/s/lp0gihtt7kyqtwc/Locales.xml?dl=0
This comment has been removed by the author.
ReplyDeleteHi Kotix.
ReplyDeleteI try to install aroma but it doesn t work when i click on system upgrade my unit reboot. I uncompress your zip on sd card and i place it in sd card emplacement not in gps sd card.
Can you help me please
Thx
You probably have a bugged firmware prior may 2014, you need sdflasher procedure to update the fw.
DeleteWhen you said that i ve a bugged firmware is it the actualy runs or is the downloaded fw.
DeleteElse have you a tutorial to install your fw?
Hello,
ReplyDeleteI have some questions:
1) I believe my installation manual is not complete, someone could send me the diagram for me to check?
2) How long should it take to boot S150 with Aroma 2.4? I believe the MEUI equipment is taking too long.
3) there is some conexção with some help beyond the vehicle battery battery?
4) someone is using 3G Dougle with the S150, if so, which model the Dougle?
Grateful for the support,
Can you explain better? even in spanish if you like.
DeleteTry to be more clear with my questions:
Delete1) I believe that my S150 was mounted in the vehicle with the wrong connection. I think he takes too long to connect between 40s.Então 35s and I believe it should have something to keep him in a kind stand-by status. As I do not know personally someone who has another S150 is difficult to compare. So it would be interesting to see if (a) someone has the installation diagram to compare I (b) check for an internal battery to keep the S150 stand-by. So I have the following question: you have a diagram of the S150 installation? And you know if the S150 has an internal backup battery, or should I install?
2) About 3G. I've tried various settings and various posts including the XDA site. Today I realize that the S150 realizes Modem, and even indicates the available operator, but it does not connect. The extranho is that I need to unplug and plug the 3G Dougle so that it recognizes the modem. When I turn the S150, it energizes the 3G Dougle, and I believe that at this time the modem is sending something to the S150, that being initializing discards information. Soon after he is booted, when I unplug and plug the modem it does not rule out the modem initialization information, and then recognizes the modem. But he still does not connect. I know that the PPP Widget can do this, but the process is getting a lot of work. Note: connect the S150, unplug and plug the modem and still boot the PPP Widget is a lot to keep calling every time you enter the car. Seen it, I wonder if anyone uses the 3G Dougle so we can talk about this problem.
Can you help me with my problems?
1. Android boot in 30-35 seconds, that is normal and during boot you'll see the animation.There is no battery or any special connection in the unit.
Delete2. I cannot help on 3g i use WiFi.
you said that add the "megane3.apk " to wince folder.. can't see anything there
ReplyDeletethis file do what?
show doors open?
show temperature?
Yes, it shows the canbus infos.
DeleteYou nave to pur it in the folder winca\app of my rom before flashing.
where is the megane file located? Cant see in your files...
Deletecan't see it
and put where?
winca\system\app (like in description)
or winca\app
where is the megane file located? Cant see in your files...
Deletecan't see it
and put where?
winca\system\app (like in description)
or winca\app
Dear KoTiX,
ReplyDeleteFirst, I have to thank you for your work.
I have installed your ROM on my car, Renault Megane II, and everything is fine.
I have a problem with bluetooth I hope you can help me with.
The problem is when I get a phone call, the caller name does not appear and I get "Unknown" although I have downloaded my phonebook to the head unit. If I open the bluetooth application and click on contacts, they are there. After doing that, I get the caller Name.
So, I have to access the phonebook on the head unit once after startup.
Can I do anything for it?
Thanks a lot
It's a known firmware bug, i can't do anything about it. Sorry.
Deletehi,
ReplyDeletei have had very strange thing while initiating the radio(e246) with the prepared fused and 2.6 version.
sd in gps slot, turning on the radio, 15 seconds black screen, and then weird white on screen with fading effects and then strange colourful vertical strips appears at the right side of the screen. few beeps were sound and thats it. nothing else happen.
(removing the sd from the slot and starting up the radio again boot to the wince like nothing happened.)
have you encounter that kind of issue?
would much appreciate your assistant.
my system info is:
os: s100-heb.a20140722-b2.2
app: s100-app-v1.5.9.25
mcu: t0nm s00e c246
dvd: 3255 v100 7706
bt: hw07-sw01.54.00
can bus: vw01 v2.78.025bp
oem info: a083
Is the sd fused correctly with correct bootloader?
DeleteDid you make a double copy of the fw files in "winca" folder and root of sd?
yes thats the strange thing about it.
Deletei have successfully re-layout and fuzed u-boot_udsd.bin
copied the wince folder from you're firmware to sd root and another copy (of its content only) to sd root.
modefied the asset and factory files to match my e246 and thats it.
put my radio into bluetooth erased all connections.
powered it off and put the sd into gps slot.
and it seems that it doesn't entering the boot correctly.
kind of drivers mismatch or i don't know what. those vertical colourful strip looks scary.
i took the boot loader from your "S100 to S150 conversion. Convert the WinCE cardvd to Android." page.
Deleteis there a different one that i might confused with?
Is it possible this is due to my sd card capacity is 4gb?
DeleteThe vertical lines that you see it's the MCU that is not initialized, what looks wierd to me is the mcu that you have now "t0nm". Maybe that mcu is configured to don't start if there is not the right bootloader (I'm just supposing it) but what is really dangerous is that if you don't have the right android mcu to flash on your unit and you flash the wrong one, you'll surely brick it.
DeleteThe bootloader is fine, capacity is ok too.
I wouldn't risk more...
Hello, I have a doubt whether I use the rom, the information from my device are:
DeleteAndroid: 2.3.4
Model SMDKV210
MCU: version: K002
Flash version: 500c
IPA version: 0002
I do the update?
Kotix thank you for your answer.
Deletei just really need waze navigation in my car radio.
is there any way i can put waze and internet using winCE?
if not, would you be able to try further assist me with the conversion? I don't mind brake it.
kind regards.
Would you think it worse the try of reflash e246 wince on my unit, and let it flash my mcu version as well?
DeleteMaybe this will unlock my ability to flash into android?
wince mcu don't work right on android, forget it.
Deletei'm just thinking how to bypass my issue,
Deletesince I know that other e246 manage to successfully install android on their devices,
i'm trying to figure out what is the difference between their device and mine,
as far as I concern, there are only two differences: 1. application version 2. mcu version.
hence application v
ersion cannot determine success or failure during flash (this is what flash does, flashing the application version), i only left with MCU version issue. which I think that maybe the MCU version is protecting the unit from being flash by boot loader.
this is why i'm trying to figure out a way to bypass this protection.
and i thought that maybe if I will succeed to flash my unit with an older version for wince and mcu,
then the protection won't be applied (just like other owners of c246), and then I would be able to convert it into Android as for the normal method
what do you think?a
This is what i think: winca is somehow blocking the use of fused sd cards in android, maybe they are doing the same on wince. I can see that your unit is pretty new (july 22) and have a 2.2 bootloader.
DeleteMaybe this bootloader prevent fused sd from booting and so maybe you are right that if you are able to downgrade to a lower version of wince bootloader first, then you could boot to android after that.
Before you do anything i suggest you to find your original wince fw, an older wince fw like 1.10.7 and the original i246 android fw; once you have them you should be safe enought to make your tryes.
Good luck.
This comment has been removed by the author.
ReplyDeleteHi Kotix,
ReplyDeleteWhen I try to flash the system it starts up with verifing and unpacking the software but the screen does not show anything. When I push the reset button and hold it it shows the process. During the process you must press next next etc. But during the mcu installer the system hangs. With the original installer of the 4.0 android it goes smoothly and during the mcu installer the screen is up again. But with the orignal I have no steering wheels etc.
Back to WinCE is also a problem because during the install you have to calibrate the screen.
Do you know why the screen is blank and light up while holding the reset button?
Regards,
Stronk
I guess you have tryed the new 9/11 firmware, right?
Deletewinca have kind of blocked the fused sd procedure.
To be able to install wince avoiding the touchscreen calibration, simply edit the file update.xml and set to "false" the tag related to Touch calibration.
Tnx. I will try that.
DeleteI was using your android installer and a original 4.0 one, everything worked but I could not find a good working navi so I decided to flash the system back to the original wince 1.1.9 and also 1.2.9.18. A flashed it many times but since this week I've got a blank screen during the process.
Great tip Marco! System works again. Unfortunate the android system was not stable enough so I had to go back to wince.
DeleteHappy for been helpfull :)
DeleteIf you wish, hit the donate button, tnx ;)
This comment has been removed by the author.
ReplyDeleteHi KoTIX,
ReplyDeletemaybe you can help me a little bit...I've been using your great custom rom v2.6 for a while, but because of not workin' my bluetooth phonebbok I finally switched to the latest official I001 firmware build no. IML74K-20140902 form carnaviplayer.com (https://mega.co.nz/#!G0QXSZ6Y!SNqDxB7i_BADPUVmDJdzT36Hozm5KPNfg_wtk9We7FM)
Now my bluetooth phonebook works just fine but there is a problem with GoogleServicesFramework and other google apps - they don't work. I cannot instal the apk from PlayStore and any other version of apk downloaded elswhere. There's constant error "Incompatible with other application(s) using the same shared user ID"
I can do nothing about it because of no root access - how can I root the firmware? And is there any solution to fix this annoying issue?
Maybe in near future you can publish a new version of your rooted, fixed KoTIX rom based on that version o firmware? Would be great! I miss your modded FM Radio.apk as well.
Thanks for any help in advance! I appreciate your work!
Regards
Maciej
https://www.dropbox.com/s/nx0ywzaiy7pqy36/S150%204.03%20KoTiX_v2.7.rar?dl=0
Deletehi KoTiX,
ReplyDeleteI have a c056 winCE6.0 s100 unit with canbus for my Mitsubishi outlander. I checked your rom list but could not find a version for c056 (i056). is it possible for you to do a version for my c056 device. thank you very much a lot in advance for all your help.
best regards,
This comment has been removed by the author.
ReplyDeleteBuenos dias kotix,
ReplyDeleteHe instalado la version 2.7 y para seleccionar el tipo de canbus entro en el bluetooth y pongo ##0323 y selecciono canbus Mazda3 y tv digital.
Al salir tv digital lo guarda pero canbus no.
Hay algun fichero que se pueda editar a mano para cambiar el canbus??
Gracias por tu trabajo.
FactoryModeValue.xml en la carpeta config ante que flashar
DeleteHi Kotix
ReplyDeleteI have a few questions if I may.
1) Does it work on Witson W2-C001 C093?
2) Does CANbus work on C093?
3) Can I reverse back to WINCE 6.0 after upgrading to Android?
Thank you very much, Kajoe
1) i have no idea
Delete2) i have no idea
3) If you don't make mistakes, yes it's possible to switch back to wince using wince-sdboot
Hi,
ReplyDeleteI have Toyota Rav4 2014 - S100 C247 wince
OS Edition: S100-UNI-120140106-A2.1
APP Edition: S100-APP-V1.2.9.0
MCU Edition: N00L S00E C247
DVD Edition: 3227 V100 7706
BT Edition: 20121204
Can Bus: Connect Success, CAMRY Jun 2013
OEM Info A002
I know that the C247 is not in the safe to upgrade list.
However it uses the same MCU/Flash versions as the C018/C064.
Do you this it will be safe to upgrade to S150 using the I018/I064 MCU/Flash images?
Do you have I018/I064 images?
Thanks
it should be safe enought but it's your decision, you take the risk.
DeleteHi
DeleteSome questions before I try it.
How about the mcu image? Should I use the mcu.bin that you provide? or should I use mcu.bin for the I018/I064?
Same thing for the flash?
In case I need I018/I064 mcu/flash images, do you have a link for these images?
Regarding the Andriod image, how stable is it? What are the currently known bugs?
Thanks
Hi Kotix,
DeleteCan you please help with the MCU questions? I want to try andriod on this unit, but I am not sure regarding what MCU version should I use, and where can I download it.
Thanks
Good day Kotix,
ReplyDeleteI have the Ford Ranger C245 S100 unit, where can I get the Android Software for this, I know there is a I245 with Android for this unit available.
Regards
Can't help you on this, sorry.
DeleteCiao Kotix ho scaricato il tuo custom firmware ROM 2.6, ho sostituito la tua cartella "config" con la mia per l'unità I140 (ma non quella all'interno di "update_s150A"). Ora dovrei aggiornare. Premetto che ho Android 2.3.4 di fabbrica e l'opzione "system update" funzionante nelle impostazioni. Potresti darmi una dritta? Così vediamo se possiamo adattare il tuo custom firmware anche su unità i140 Ford Focus, C-Max, Kuga
ReplyDeleteGrazie in anticipo
Non puoi aggiornare da system update, per passare da android 2.34 a 4.03 serve sd-flasher, stessa procedura per il passaggio da wince ad android.
DeleteCiao:)
1) Ok ma io ho il GPS slot guasto (dico che è guasto perché quando inserisco una micro-sd non da segni di vita). Posso usare anche DVD Slot in alternativa?
ReplyDelete2) meglio provare con la tua nuova 2.7 o rimanere con a 2.6?
Grazie
Allora non mettere assolutamente la 2.7 perchè da quella gli aggiornamenti vanno solo dallo slot gps.
DeleteResteresti fregato e non potrai più flashare nulla.
E cmq il passaggio ad android 4.03 si fa solo dallo slot gps
DeleteE quindi non posso far niente?
ReplyDeleteNo purtroppo, devi sostituire il lettore sd dello slot gps
DeleteGrazie, non ho la più pallida idea di chi affidarmi per la riparazione
ReplyDeleteCorreção TV no Brasil
ReplyDeletehttps://www.youtube.com/watch?v=2PpRfqPpPfo
Ciao Kotix, GPS SLOT legge l'sd nella stessa maniera del DVD SLOT ad unità accesa o riconosce solo le sd per l'aggiornamento dopo il riavvio dell'apparecchio?
ReplyDeleteGrazie
Usa un file browser e vedi se funziona, pe rleggere legge tutto uguale all'altro.
DeleteRisolto, inserivo l'sd al contrario. Una volta fusa l'sd faccio semplicemente copia/incolla della cartella "winca" o solo del contenuto?
ReplyDeleteCiao Kotix Upgrade completato con la ROM 2.7 su unità I140 compreso BLUETOOTH e MCU. Una Bomba!!!!
ReplyDeleteL'unica cosa, per quanto riguarda i comandi al volante, sia col + che col - alzo il volume ma non lo abbasso (quindi CANBUS 50% funzionante).
Solo 2 domande
1) IGO ricerca di continuo i satelliti anche se il monitor GPS ne aggancia 11. Come mai?
2) Come fai ad avere il player di POWERAMP nella schermata principale?
Ho notato un netto miglioramento del TOUCHSCREEN molto più preciso di prima con Android 2.3.4. Non so se possa centrare qualcosa col FW ma comunque davvero sensazionale
ReplyDeleteHi Kotix,
ReplyDeleteI wonder what your version supports this for my central
Model: S150 I802
MCU: 0421
Flash Version: S009
Android: 2.3.4
I would like to install the fw 4.0 or higher.
Thank you.
What are our latest news in your 2.7 version?
ReplyDeleteThx
Hi Fabien https://www.dropbox.com/s/nx0ywzaiy7pqy36/S150%204.03%20KoTiX_v2.7.rar?dl=0
DeleteInstalling the 2.7 rom successfully completed units of I140 entering the Config folder of my unit , steering wheel controls ok, ok Sygic . truly spectacular. Kotix are great !!
ReplyDeleteConcerning the last version of google play and google's services is it ok? Because i ve a problem with deezer and an other application.
ReplyDeleteReverse function return me a black screen, ve you got a solution?
Thx
Google play and services work on my 2.6 rom.
DeleteReverse function work too on my i001 model.
I don t remember the version that i ve installed. For reverse function when i touch my "black screen" it blinking at every touch.
DeleteIs it possible to report the A/C mode on the unit?
Hi KoTix
ReplyDeleteHow to upgrade from version 2.4 to version 2.6 this ??
Been trying to copy the files to the SD memory, but it does not work, has been trying to copy the files on the DVD it did not work !!
Please indicate in detail the upgrade method if allowed
What are the files that copy in case of upgrade
Is used programs or just send the files to the SD memory only?
Please help
The current problems in version 2.4 is the Wi-Fi does not work and I have a problem with the audio player does not work
Thank you
Put the winca folder on the root of SD, insert sd into dvd slot and form settings choose system upgrade.
Delete"KoTiX Radio player mod" means that you replaced the original radio app? Is the Alternative Frequency feature working now?
ReplyDeleteAlso, can you please point me the procedure of moving from the stock fw of s150 i802 to your latest fw?
Thanks (sorry if this was posted twice)
The procedure to move from 2.34 to 4.03 is this one:
Deletehttp://kotixworld.blogspot.it/2014/01/s100-to-s150-conversion-convert-wince.html
This comment has been removed by the author.
DeleteI already have 4.03. I want to move from original 4.03 to yours.
ReplyDeleteSecondly, can you confirm if it works on i802? Thanks.
It work on i802.
DeletePut winca folder on root of sd.
If you have "system upgrade" in settings menu put sd in DVD slot and hit upgrade.
If you don't have that option in settings pur SD in GPS slot andò power on the unit.
Great, thank you!
DeleteWhat about roll back? Should I use the image from here http://forum.xda-developers.com/showthread.php?t=2503964 and follow the same procedure as you said above?
I just bought an S150 system for an Audi A4. Is there a guide available for new bee's to do the upgrade? Or, maybe is there somebody in the Netherlands that is willing to do the upgrade for me for a fee?
ReplyDeleteSee instructions above for your case Franky!
Deleteupdated my i802 but the back button just stopped working and the options of colors also led stopped working you have any solution for this?
ReplyDeleteYou could set button color into config file: FactoryModeValues.xml.
DeleteAfter setting correct RGB values, you have to flash it again.
I put in those values
R="255"
G="0"
B="0"
to get a red color.
Ciao Kotix ho eliminato per sbaglio la Radio perché non riuscivo a chiuderla. C'è modo di reinstallarla o ripristinarla? Ho provato ad estrarre il file APK dalla tua ROM ma dopo l'installazione non la trovo da nessuna parte. Dovrò reinstallare android 4.03?
ReplyDeleteCon EsFilexplorer o rootexplorer la copi in system\app e applichi i permessi di scrittura e lettura come gli altri files. altrimenti reinstalla il fw.
DeleteChe fine ha fatto Magic Link?
ReplyDeleteKoTix, What about roll back? Should I use the image from here http://forum.xda-developers.com/showthread.php?t=2503964 and follow the same procedure as you said above?
ReplyDeleteIn the next days all the firmwares for all the android models will be available here:
Deletehttp://www.roadnav.com/forum/firmware-aa/s150-android/4163-rn-s150-android-firmware-update
check it out. ;)
Hola KoTix, gran trabajo si señor. Estoy esperando mi navegador y de mientras descargando todo lo necesario para actualizarlo :) Pero me surge una duda.....Qué valores debo de poner en el fichero ADSet.xml para que funcione todo correctamente con mi IX35? He flasheado miles de aparatos pero no me aclaro con este fichero...Existe alguno por defecto para el IX35 (Mi unidad es una IP-C047I
ReplyDeleteUn millon de gracias ;)
Vas aqui y descarga el fw original para i047:
Deletehttp://www.roadnav.com/forum/firmware-aa/s150-android/4163-rn-s150-android-firmware-update/page2
Gracias !!!
DeleteHi Kotix
ReplyDeleteI ve insalled your 2.7 version and wifi doesn't work. Model of wifi "comfast cf-wu720n.
Have you got a solution?
even after a reboot it doesn't connect?
Deletewas it working before?
After a lots of reboot it s ok. When I insert an empty sd card on Gps slot, the unit doesn t start? What is the maximun capacity of sd card that read the unit?
DeleteThx
Hi Kotix, sorry I'm new here, I have a question. I just upgraded a few days ago to android 4.03, from roadnav, my question is; Can I upgrade again to android 4.03 KoTiX rom v2.4 after editing ADset file to suit my car model as you mentioned somewhere before, and can I copy the apps which you don"t have in your version like ESFileExplorer_3.0.5.5.apk
ReplyDeleteGoogle_Map_6.14.4.apk
org.uguess.android.sysinfo.pro.apk
UCBrowser_V2.4.2.348_Android3_pf147_(Build13092915).apk
and how do I upgrade ??? do i use the same steps that I did before??? this one here http://kotixworld.blogspot.it/2014/01/s100-to-s150-conversion-convert-wince.html
thank you very much for ur effort, It's kindly appreciated
if you have a newer fw from after july 2014 you can simply put the sd in the gps slot and power on, if it's prior july, you have to go to settigns->system upgrade.
Deleteyou don't need a fused sd card if you are already on android 4.03
Hi Kotix, I put sd in the gps slot and i powered it on, nothing happened, the screen just went black, and I waited for a while and steel nothing happened, so now it's just a black screen and my unit is not working anymore.
DeleteIs there is any sd recovery tool for s150 anorid 4.0.3 ?? or any idea how to fix it ???
Deletemy unit info is S150 model i056 android 4.0.3
DeleteHi KoTiX, I can install this Android hardware below?
ReplyDeleteFirmware s100 for HB20.
OS: S100-UNI.A20140106-B2.1
APP: S100-APP-V1.3.9.7
MCU:Z60L S00E C239
DVD:3255 V100 7706
BT: 20121204
OEM info: A018
Based on WinCE 6.0
here is the original fw for the android version of your model:
Deletehttp://www.roadnav.com/forum/firmware-aa/s150-android/4163-rn-s150-android-firmware-update?p=4709#post4709
ask the pwd in that forum.
Hola, estoy intentando instalar este firmware, pero no lo consigo.
ReplyDeleteHe descomprimido el .rar y lo he copiado en una tarjeta microSD previamente formateada. El dispositivo tiene dos ranuras para microSD, una para los mapas del navegador de wince (también se utiliza para instalar android) y otra para datos. He probado en las dos ranuras y he pulsado la opción de actualizar el sistema. Si está en la ranura de datos se reinicia y no cambia nada, y en la otra ranura se queda la pantalla en negro durante mucho tiempo (lo he dejado entre 10 y 15 min) y nada.
¿Podrías echarme una mano?
Muchas gracias de antemano.
Saludos.
Que firmware tiene ahora? qual version?
ReplyDeleteNumero de modelo: Full AOSP on SMDKV210
DeleteVersión de Android: 4.0.3
Versión de banda base: Desconocido
Versión de kernel: 3.0.8 winca@HP-Z220 #9
Versión MCU: 0004
Versión DVD: 3200
Versión Flash: S00C
Versión IAP: 0002
Nombre Modelo: I320
Conexión CanBus: Fallo
Número de compilación: IML74K-20140430
Muchas gracias de antemano.
Saludos.
También he probado como cuando instalé android (meter la tarjeta y luego encender), y nada. Se inicia como normalmente.
DeleteEn la tarjeta SD tiene que aver la carpeta "winca" con todos los archivos y la carpeta "config" del tu modelo, pone la tarjeta en el slot DVD y hace "System upgrade" desde los settings.
DeleteSi va a enstalar mi rom, al empezar de el aroma installer tiene que seleccionar "Custom Install"
Muchas gracias por tu ayuda Kotix,
Deletehe creado la microSD con la imagen que tenia y le he pegado tu carpeta winca, después he modificado el archivo ADSet.xml con el modelo de mi radio y listo. Todo funcionando OK excepto al pasar los contactos del movil (galaxy S3).
En términos generales me parece mas estable y más fluida que la que tenia antes.
Saludos.